Receiver Table M Universal

This table has a heavy basic construction of the machine frame for a flat work surface.

Paneling of the work surface with multi-ply wood panels.

12 stop bolts below for taking over the wall elements, height 120 mm. On the front sides there is an electrical connection (240V, 16A) and a pneumatic connection (R1/4 inch) for the use of hand tools such as nailers or guns.

Pivoting via 3 hydraulic cylinders for element weights of up to 4,000 kg at an angle of 85°. Safety valves on the cylinders prevent accidental lowering of the work surface. For the supply from the transmitter to the receiver, a cable duct of at least 200 x 200 mm must be produced by the customer free of charge according to our specifications.

Equipping the recipient with motorized travel up to 2 m on large profile wheels and flat running rails. For different wall thicknesses, the transfer distance to the encoder can be set to 3 positions using a selector switch. Additional ballast insert integrated in the holder as anti-tipping device. Drive via geared motor with soft start. Supply via moving cable drag chain from below.